The smallest and High Flexible Thermal Imaging camera The FI232E is an intelligent, economicaluncooled focal plane onlinethermal imager, based on DSPtechnology and flexible TCP/IP interface, integrated in a verycompact housing. The FI232E provides a high degreeof flexibility in frame rate, user interfaceand temperature range, so that it can be adapted to different industrialenvironments and run in the best state. The FI232E can be used in scientific researchand industrial fields. With outstanding imagequality the minimum temperature difference of 0.05°C can be distinguished. FI232E can be said to be born for R&D and engineering. As a plug-and-play thermal imaging camera, simple but powerful. All infrared thermal imaging functions can be optimized according to user applications. |
|||||||
|
|
||||||
IR Parameter | |
UFDA | 256×192 |
Sensitivity/NETD | <50mk |
Frequency | 25fps |
Lens | 2.3mm/4mm/ 6.8mm/ |
View | 90°x62.5°/ 42°x 32.1° /25.5°x19.2° |
Focus | Fixed |
Templae | At least 6 template |
Visible Parameter | |
Resolution | 1920×1080 |
View Angel | 69° |
Lens | 5.75mm |
Focus | Fixed |
Temperature | |
Temp range | -20℃~120℃ (Or -20℃~450℃ ) |
Accuracy | ±2℃ or 2% of range |
Spot Maker | 6 movable points for temperature measurement, which can be combined with other temperature measurement points or the highest temperature of the temperature measurement area,Compare the lowest temperature and the average temperature |
Area Maker | 6 movable areas for temperature measurement, the area has the highest temperature, the lowest temperature and the average temperature, which can be compared with the highest temperature, the lowest temperature and the average temperature of other temperature measurement points or temperature measurement areas |
Line Maker | 1 line temperature measurement, the line has the highest temperature, the lowest temperature and the average temperature |
Pre Setup | Y |
Temp Diff | Temperature difference between temperature measurement and reference temperature |
Humidity | Manual |
Atmospheric Transfer Correction | Automatic, based on input values of distance, atmospheric temperature and relative humidity |
Emissivity Correction | 0.01 to 1.0 |
RTC | Automatic, input value based on reflected temperature |
Temperature Correction | Overall and individual target parameters |
Alarm | |
Function | All temperature measurement points, all temperature measurement areas and the maximum temperature, minimum temperature and average temperature in the temperature measurement line can be configured with separate alarm outputs |
Output | I/O output、log、image saving |
Protocal | |
ONVIF | Support |
GB/28181 | Support |
Image Steam | |
Format | H.264 |
Resolution | Visible 1920x1080 IR Image 768x3576(upscale) |
Image Saving | |
storage medium | Built-in memory (Flash), optional built-in TF card, maximum support 64GB |
Image storage mode | Infrared/visible light images are stored separately/infrared and visible light images are stored at the same time |
file format | PEG、MP4 |
SETUP | |
B/S Configuration | Y |
C/S Configuration | Y |
SDK | The original temperature data is output externally, and the user can carry out secondary development |
Power | |
External | DC12V |
POE | 802.3 at |
Connection | |
Aviation Pug 7 Pin | Include DC12, alarm IO and RS232 |
Aviation Pug 5 Pin | Includes 10M / 100M adaptive Ethernet port and POE power supply |
Environmental | |
Protection | IP65 |
Operating Temp | -20°C to 50°C |
Storage Temp | -40°C to 70°C |
Humidity | ≤95% non-condensing |
EMC | EN 61000-6-2:2001/EN 61000-6-3:2001)/FCC 47 CFR 15 |
Shock | 25G, IEC68-2-29 |
Vibration | 2G, IEC68-2-6 |
Physical | |
Size ( W × H × L ) | 36cm×48cm×54.75cm |